EVERY BOAT NEEDS A PROTECTIVE
COATING APPLIED IN A PARTICULAR WAY

Giving a boat a protective coating is a complex operation that differs according to the hull material and the type of product used.

The cycle involves the application of a variety of one-pack or two-pack products in a precise sequence and in combinations determined by their specific characteristics. Optimal protection, aesthetics and durability are achieved by meticulous execution of individual steps.

STEELALUMINIUMGRP AND COMPOSITES
  1. 1 coat of Adherpox (DFT 50 μm)
    If necessary apply a coat of Epomast Evo
    1 coat of Adherpox (DFT 100 μm)
  2. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  3. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  4. 3 coats of Adherpox (DFT 150 μm)
  5. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

System
WOODSOLVENT-BASED EXPOSED WOODWATER-BASED EXPOSED WOOD
ONE-PACK SYSTEM
  1. 1 coat of Gelprime (DFT 45 μm)
  2. 2 coats of Easylac (DFT 40 μm, ) or
    2 coats of Unigloss (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  3. 1/3 coats of Ticoprene (DFT 60 μm)
  4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

One-pack system
TWO-PACK SYSTEM
  1. 1 coat of Adherpox (DFT 60 μm)
    If necessary apply a coat of Epomast Evo
  2. 1 coat of Adherpox (DFT 100 μm)
  3. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  4. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  5. 2 coats of Resina 3+ (DFT 100 μm) and
    1 coat of Adherpox (DFT 60 μm) or
    1 coat of Adherpox (DFT 150 μm)
  6. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Two-pack system
OSMOSIS
PREVENTION SYSTEM
  1. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C
    Before applying primer, sand with fine grade abrasive paper
  2. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Adherpox (DFT 60 μm)
  3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Prevention system
REPAIR SYSTEM
  1. 1 coat of Aquastop (DFT 200 μm)
  2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
    Sand the surface before continuing with subsequent coats
  3. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C.
    Before applying primer, sand with fine grade abrasive paper
  4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
    1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
  5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.

Repair system
SPECIAL PARTS
METAL BULBOUS BOWS
  1. 3 coats of Adherpox (DFT 150 μm)
  2. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Metal bulbous bows
PROPELLERS, SHAFTS AND STERNDRIVES
  1. 1 coat of Propeller Primer (DFT 15 μm)
  2. 2 coats of Propeller (DFT 60 μm)

The indicated thickness refers to a single coat.

Propellers, shafts and sterndrives
PEAKS, GALLEYS, ICE BOXES AND BILGES

Two-pack products: 2 coats of Unikote Pro, Adherpox or Ecoplast (DFT 150 μm)
One-pack products: only for peaks and bilges, 2 coats of Sentiflex (DFT 40 μm)

The indicated thickness refers to a single coat.

INFLATABLE BOATS
  1. 2 coats of Gummipaint (DFT 40 μm)
  2. 2 coats of Gummipaint A/F (DFT 25 μm)
    Rigid GRP hulls: see GRP boat hull system

The indicated thickness refers to a single coat.

Inflatable boats

Ask
the expert

If you have any questions about our products,
how to use them, or any other matter, please don't
hesitate to contact us.

Our experts are on hand to support you and
offer advice on the best way to paint and protect
your boat.

Contact us