FILLERS
EPOMAST RAPIDO
FAST DRYING EPOXY KNIFING FILLER
CODE: 6604
Two-pack, fast drying, high resistance epoxy filler designed for final profiling and small repairs. Can be applied up to a thickness of 1 cm with one single-pass. Epomast Rapido can be applied to any kind of substrate after the application of a suitable primer. Can be applied onto Epomast Pro or to suitable epoxy undercoats both on below and above waterline areas. For best results, prior to the application of a topcoat, a suitable barriercoat or undercoat are recommended. Easy to sand in a short time, both dry and wet conditions.
COLOURS AND PACK SIZE
0,5 L
153
DOCUMENTS
CERTIFICATIONS
MATERIALS
TECHNICAL SPECIFICATIONS
Theoretical coverage1 m2L
Mixing ratio1:1
Thinner6610 for cleaning only
CHARACTERISTICS
TYPES OF APPLICATION
PAINTING CYCLES
- 1 coat of Adherpox (DFT 50 μm)
If necessary apply a coat of Epomast Evo
1 coat of Adherpox (DFT 100 μm) - 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 2 coats of Adherpox (DFT 150 μm)
- 2 coats of Antifouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
- 1 coat of Adherpox (DFT 60 μm)
If necessary apply a coat of Epomast Evo - 1 coat of Adherpox (DFT 100 μm)
- 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 2 coats of Resina 3+ (DFT 100 μm) and
1 coat of Adherpox (DFT 60 μm) or
1 coat of Adherpox (DFT 150 μm) - 2 coats of Antifouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
Ask the expert
If you have any questions about our products, how to use them, or any other matter, please don't hesitate to contact us.
Our experts are on hand to support you and offer advice on the best way to paint and protect your boat.
* mandatory fields