FILLERS
EPOMAST
GENERAL PURPOSE EPOXY FILLER
CODE: 6662
High-strength two-pack epoxy filler with great mechanical resistence. Excellent adherence to any type of surface and to epoxy primers. Highly resistant to water. Epomast can be used to make joints and can be used to repair heavily damaged surfaces. Thicknesses of up to 10 mm can be reconstructed using a spatula and Epomast can be applied directly to wood, GRP, previously disc-ground steel and aluminium.
COLOURS AND PACK SIZE
0,5 Kg
754
2 Kg
754
DOCUMENTS
CERTIFICATIONS
MATERIALS
TECHNICAL SPECIFICATIONS
Theoretical coverage1 m2L
Mixing ratio1:1
Thinner6610 for cleaning only
CHARACTERISTICS
TYPES OF APPLICATION
PAINTING CYCLES
- 1 coat of Adherpox (DFT 50 μm)
If necessary apply a coat of Epomast Evo
1 coat of Adherpox (DFT 100 μm) - 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 2 coats of Adherpox (DFT 150 μm)
- 2 coats of Antifouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
- 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 1 coat of Adherpox (DFT 60 μm)
- 2 coats of Antifouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
- 1 coat of Aquastop (DFT 200 μm)
- After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
Sand the surface before continuing with subsequent coats - 2 coats of Aquastop (DFT 200 μm)
Wait a minimum of 48 hours (maximum 72) at 20°C.
Before applying primer, sand with fine grade abrasive paper - 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C - 2 coats of Antifouling paint (DFT 50 μm)
WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.
ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.
The indicated thickness refers to a single coat.
- 1 coat of Adherpox (DFT 60 μm)
If necessary apply a coat of Epomast Evo - 1 coat of Adherpox (DFT 100 μm)
- 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 2 coats of Resina 3+ (DFT 100 μm) and
1 coat of Adherpox (DFT 60 μm) or
1 coat of Adherpox (DFT 150 μm) - 2 coats of Antifouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
- 3 coats of Adherpox (DFT 150 μm)
- 2 coats of Antifouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
Ask the expert
If you have any questions about our products, how to use them, or any other matter, please don't hesitate to contact us.
Our experts are on hand to support you and offer advice on the best way to paint and protect your boat.
* mandatory fields