PRIMERS & UNDERCOATS, OSMOSIS

ADHERGLASS

ADHERGLASS

ADHESION PRIMER FOR GRP
CODE: 6624
Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop. Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats. The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.

COLOURS AND PACK SIZE

0,75 L
372
5 L
372

DOCUMENTS

CERTIFICATIONS

TECHNICAL SPECIFICATIONS

Theoretical coverage13,3 m2L
Recoating time3-12h (20°C)
Hard dry6h (20°C)
Thinner6780 for cleaning only

CHARACTERISTICS

TYPES OF APPLICATION

PAINTING CYCLES
  1. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Ticoprene(DFT 60 μm) and
    1 coat of Gelprime (DFT 45 μm)
  2. 2 coats of Easylac (DFT 40 μm) or
    2 coats of Unigloss (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  3. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Ticoprene (DFT 60 μm)
  4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

One-pack system
PREVENTION SYSTEM
  1. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C
    Before applying primer, sand with fine grade abrasive paper
  2. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Adherpox (DFT 60 μm)
  3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Prevention system
REPAIR SYSTEM
  1. 1 coat of Aquastop (DFT 200 μm)
  2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
    Sand the surface before continuing with subsequent coats
  3. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C.
    Before applying primer, sand with fine grade abrasive paper
  4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
    1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
  5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.

Repair system

Ask the expert

If you have any questions about our products, how to use them, or any other matter, please don't hesitate to contact us.
Our experts are on hand to support you and offer advice on the best way to paint and protect your boat.

* mandatory fields