PRIMERS & UNDERCOATS, OSMOSIS

ADHERPOX

ADHERPOX

TWO-PACK EPOXY PRIMER
CODE: 6210
Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.

COLOURS AND PACK SIZE

0,75 L
153
2,5 L
153

DOCUMENTS

TECHNICAL SPECIFICATIONS

Theoretical coverage11,3 m2L
Mixing ratio3:1
Recoating time10h-3/6months (20°C)
Hard dry7days (20°C)
Thinner6610

TYPES OF APPLICATION

15-25%
3-5%
PAINTING CYCLES
  1. 1 coat of Adherpox (DFT 50 μm)
    If necessary apply a coat of Epomast Evo
    1 coat of Adherpox (DFT 100 μm)
  2. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  3. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  4. 3 coats of Adherpox (DFT 150 μm)
  5. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

System
  1. 1 coat of Adherpox (DFT 50 μm)
    If necessary apply a coat of Epomast Evo
    1 coat of Adherpox (DFT 100 μm)
  2. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  3. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  4. 2 coats of Adherpox (DFT 150 μm)
  5. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

System
  1. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  2. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  3. 1 coat of Adherpox (DFT 60 μm)
  4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Two-pack system
PREVENTION SYSTEM
  1. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C
    Before applying primer, sand with fine grade abrasive paper
  2. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Adherpox (DFT 60 μm)
  3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Prevention system
REPAIR SYSTEM
  1. 1 coat of Aquastop (DFT 200 μm)
  2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
    Sand the surface before continuing with subsequent coats
  3. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C.
    Before applying primer, sand with fine grade abrasive paper
  4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
    1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
  5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.

Repair system
  1. 1 coat of Adherpox (DFT 60 μm)
    If necessary apply a coat of Epomast Evo
  2. 1 coat of Adherpox (DFT 100 μm)
  3. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  4. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  5. 2 coats of Resina 3+ (DFT 100 μm) and
    1 coat of Adherpox (DFT 60 μm) or
    1 coat of Adherpox (DFT 150 μm)
  6. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Two-pack system
METAL BULBOUS BOWS
  1. 3 coats of Adherpox (DFT 150 μm)
  2. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Metal bulbous bows
PEAKS, GALLEYS, ICE BOXES AND BILGES

Two-pack products: 2 coats of Unikote Pro, Adherpox or Ecoplast (DFT 150 μm)
One-pack products: only for peaks and bilges, 2 coats of Sentiflex (DFT 40 μm)

The indicated thickness refers to a single coat.

Ask the expert

If you have any questions about our products, how to use them, or any other matter, please don't hesitate to contact us.
Our experts are on hand to support you and offer advice on the best way to paint and protect your boat.

* mandatory fields