PRIMERS & UNDERCOATS, OSMOSIS

AQUASTOP

AQUASTOP

ANTIOSMOSIS PROTECTION AND TREATMENT
CODE: 6491
Aquastop is designed specifically for the treatment of GRP boats affected by OSMOSIS and is particularly recommended as a preventative, protective treatment. This product is water resistant (both sea and fresh water), making the boat highly impermeable, and forms an effective barrier layer for submerged metal parts (keels, flaps, rudders, etc.).

COLOURS AND PACK SIZE

0,75 L
571
2,5 L
571

DOCUMENTS

CERTIFICATIONS

TECHNICAL SPECIFICATIONS

Theoretical coverage5,0 m2L
Mixing ratio3:2
Recoating time16-48h (20°C)
Hard dry7days (20°C)
Thinner6610 for cleaning only

CHARACTERISTICS


TYPES OF APPLICATION

PAINTING CYCLES
  1. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  2. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  3. 1 coat of Adherpox (DFT 60 μm)
  4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Two-pack system
PREVENTION SYSTEM
  1. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C
    Before applying primer, sand with fine grade abrasive paper
  2. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Adherpox (DFT 60 μm)
  3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

Prevention system
REPAIR SYSTEM
  1. 1 coat of Aquastop (DFT 200 μm)
  2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
    Sand the surface before continuing with subsequent coats
  3. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C.
    Before applying primer, sand with fine grade abrasive paper
  4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
    1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
  5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.

Repair system

Ask the expert

If you have any questions about our products, how to use them, or any other matter, please don't hesitate to contact us.
Our experts are on hand to support you and offer advice on the best way to paint and protect your boat.

* mandatory fields